SUPPORT

ProTone

[ User Manual ]
[ User Manual from Serial 960488 (SW V1.14) ]
[ Mixer map for Cubase ]
[ Known Problem Remendy (LEDs do work but no sound) ]
[ Correction of pitch error at high notes on the Syntrack models No. 960487-960500 ]

Sysex files
Take one of these sysex files in your favorite format and reset your Syntrack back to the factory settings.
[ sy-sysex.all ]
[ sy-sysex.arr ]
[ sy-sysex.mid ]

Firmware
EPROM-Typ: 8KByte (27C64) or 16KByte (27C128)
Use a EPROM Programmer to write the .BIN
[ (v1_13.bin) ]
or .HEX-File
[ (v1_13.hex) ] into the EPROM. You can use the same EPROM. In this case, you have to clear it first with an UV-EPROM Eraser.

[ Hi resolution picture for repro (printing) cmyk 300dpi/16Bit (TIF 31.7MB) ]

[ Cyclus 3 Manual for current firmware ]
[ Portable Cyclus 3 ]
[ Cyclus 3 modification on backlight ]
[ Hardware change for Auto power off function ]

Lastest Software for the Cyclus 3 (for Flashing you need at least Bootloader Version 1.01):
[ Version 1.09 ]
[ Revisions ]

Empty memory file:
[ Empty memory sysex file ]

Visualizer:
[Visualizer 1.01]
[V1.01: includes Transponse in display of note value]

For programmers we do serve the internal memory allocation file and a tool to convert the sysexfile into a binary file:
[ MemoryAllocation ]
[ Tool (Input: /Sysex/C3Dump.syx, Output: /Sysex/C3Dump.bin) ]